Tensioners
Signode pneumatic tensioners take most of the effort out of strapping large or compressible packages. They also make tensioning uniform and precise through adjustment of the air pressure regulator.
All pneumatic tensioners, except the WP-2, have unlimited strap take-up. All pneumatic tensioners are furnished with a quick-disconnect plug.
It is essential that an air filter- regulator-lubricator assembly (Part No. 424773) be installed ahead of the tool on the air line.
HN-1-114
HN-1-114 Tensioner is designed for 1-1/4" Magnus steel strapping heavy duty applications.
WP-2
WP-2 Windlass tensioner is designed for 2" Magnus steel strapping applications.
Sealers
RCNS-2-114/34
RCNS-2-114/34 Sealer for use on 3/4" or 1-1/4" x .025" to .031" Magnus steel strapping.
N-1444-50 LSH
Pneumatic Sealer Double Crimp pneumatic hand tools for varying strap sizes and seal joint types are available for tension, seal and cut strapping.
Combination Tools
AHP Pneumatic Combination Tools
The AHP tool A heavy duty pneumatic tool designed for use with 19, 25 or 32 mm Magnus® steel strap. AHP effortlessly tensions and seals strap for the most demanding applications, where high levels of tension and pack security are demanded.
Signode produce two plastic strapping materials — Contrax® polypropylene and Tenax® polyester — are the basic components of our plastic strapping systems for the securement of a wide range of products, from newspapers, pipes and cotton bales.
Our sales, equipment service, customer service and engineering departments can help you design the optimum protective packaging system for your application.
Tensioners
Signode India offers a variety of hand tools for tensioning and sealing plastic strap. For some strapping operations, a manual tensioner and separate sealer provide an economical means of applying plastic strapping. Metal seals are used to form the strap joint.
Feedwheel type
A serrated feedwheel grips the strapping and rotates to draw up slack. Fast and easy to position and use. Take-up is unlimited, and strapping may be used directly off the coil.
Windlass type
Applies tension by gripping one end of the strapping and winding the other around a slotted shaft. Can apply greater tension than feedwheel models.
Walking gripper
Lightweight tensioner/cutter designed for buckle applications with plastic strapping. Provides maximum tension with Steelock or Dylock buckles.
Sealers
Front-action sealer handles are held perpendicular to the strapping, usually in front of the operator who pushes handles together to crimp the seal.
Combination Tools
Manual seal-feed combination tools offer the convenience of a single tool that tensions, seals and cuts the strap. These tools carry a stack of seals in a seal magazine for more efficient operation.
Manual
The AST manual seal-feed combination tool uses Contrax, Dymax and Tenax strapping. The AMT-58 is the ideal tool for High-Strength Tenax strapping.
BXT3
The BXT3 Battery-operated hand tool for plastic strapping.
TOOL TOOL TYPES / STRAP DIMENSIONS
BXT3-13 for light duty application / 9–13 mm
BXT3-16 for universal application / 13–16 mm
BXT3-19 for heavy duty application / 16–19 mm
